1
|
Analysis of cutting forces at different spindle speeds with straight and helical-flute tools for conventional-speed milling incorporating the effect of tool runout
|
AYDIN MEHMET, KÖKLÜ UĞUR
|
Mechanics Based Design of Structures and Machines
|
2024
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
2
|
Effects of compaction pressure on microstructure, mechanical properties, and machining characteristics of sintered AISI 316L steel
|
ERDEN MEHMET AKİF, KÖKLÜ UĞUR, GÜLDİBİ AHMET SERDAR, ELİTAŞ MUHAMMED
|
Walter de Gruyter GmbH
|
2024
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
3
|
The influence of drilling-induced damages and hole quality on hoop tensile and fatigue behavior of CFRP tubes
|
MORKAVUK SEZER, ASLANTAŞ KUBİLAY, GEMİ LOKMAN, KÖKLÜ UĞUR, YAZMAN ŞAKİR
|
Composites Part A: Applied Science and Manufacturing
|
2024
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
4
|
Multiscale modelling and experimental analysis of ultrasonic-assisted drilling of GLARE fibre metal laminates
|
Atif Muhammad, Wang Xibin, Xie Lijing, Giasin Khaled, Ma Yuan, Chulin Jiang, KÖKLÜ UĞUR, Sinke Jos
|
Composites Part A: Applied Science and Manufacturing
|
2024
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
5
|
Evaluation of drilling by induced delamination of hybrid biocomposites reinforced with natural fibers: A statistical analysis by RSM
|
Elhadi Abdelmalek,Amroune Salah,Slamani Mohamed,Jawaid Mohammad,KÖKLÜ UĞUR,Bidi Tarek
|
Journal of Composite Materials
|
2024
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
6
|
The Effects of Aging Process After Solution Heat Treatment on Drilling Machinability of Corrax Steel
|
GÜLDİBİ AHMET SERDAR,KÖKLÜ UĞUR,KOÇAR OĞUZ,KOCAMAN ENGİN,MORKAVUK SEZER
|
Experimental Techniques
|
2024
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
7
|
Effect of Silicon on Machinability in AlSi6, AlSi12 and AlSi18 Alloys
|
GEÇGEL BERKAY,Altıntaş Yusuf,Arslan · Muhammet Yasir,Çelen Okan Özcan,KOCAMAN ENGİN,KOÇAR OĞUZ,KÖKLÜ UĞUR
|
Silicon
|
2024
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
8
|
Investigation of the effect of symmetrical hybrid stacking on drilling machinability of unidirectional CFRP, GFRP and hybrid composites: Drilling tests and damage analysis
|
YAZMAN ŞAKİR,GEMİ LOKMAN,MORKAVUK SEZER,KÖKLÜ UĞUR
|
Composites Part A: Applied Science and Manufacturing
|
2024
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
9
|
Impact characteristics of S2-glass fibre/FM94-epoxy composites under high and cryogenic temperatures: Experimental and numerical investigation
|
Al-Azzawi Ahmad S.M.,Featherston C.A.,Lupton Colin,Jiang Chulin,Barouni Antigoni,KÖKLÜ UĞUR,Giasin Khaled
|
Composites Part B: Engineering
|
2024
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
10
|
Optimization of a Wafer Conveyor Spool for Plastic Injection Molding Production
|
Bakırtaş Kadir, KÖKLÜ UĞUR, MAYDA MURAT
|
International Journal on Engineering Applications
|
2023
|
Uluslararası
Hakemli
Scopus
Özgün Makale
|
|
|
11
|
Machinability and surface integrity investigation during helical hole milling in AZ31 magnesium alloy
|
Adhikari Raviraja, Bolar Gururaj, Shanmugam Ragavanantham, KÖKLÜ UĞUR
|
Elsevier BV
|
2023
|
Uluslararası
Hakemli
Scopus
Özgün Makale
|
|
|
12
|
Can We Use Our Dental Curing Lights to Polymerize Objects Produced with 3D Resin Printer?
|
KÖLÜŞ TÜRKAY, ŞAHBAZ MEHMET, KÖKLÜ UĞUR
|
Journal of Evolution of Medical and Dental Sciences
|
2023
|
Uluslararası
Hakemli
EBSCO Databases
Özgün Makale
|
|
|
13
|
Effects of build orientation and hatch spacing on high-speed milling behavior of L-PBF 316L stainless steel
|
KAYA GÜRKAN, KÖKLÜ UĞUR, ERGÜDER TEVFİK OĞUZHAN, Cengiz Furkan, YILDIZ FATİH
|
Walter de Gruyter GmbH
|
2023
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
14
|
Machining Temperature, Surface Integrity and Burr Size Investigation during Coolant-Free Hole Milling in Ti6Al4V Titanium Alloy
|
Shanmugam Ragavanantham, Baloor Satish Shenoy, KÖKLÜ UĞUR, Polishetty Ashwin, Bolar Gururaj
|
MDPI AG
|
2023
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
15
|
Experimental investigation of the effect of specially manufactured blank (SMB) materials on deep drawing
|
DAĞTEKİN EMRAH, GAVAS MUAMMER, KÖKLÜ UĞUR
|
SAGE Publications
|
2023
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
16
|
An Experimental Comprehensive Analysis of Drilling Carbon Fiber Reinforced Plastic Tubes and Comparison With Carbon Fiber Reinforced Plastic Plate
|
MORKAVUK SEZER, KÖKLÜ UĞUR, ASLANTAŞ KUBİLAY
|
SAGE Publications
|
2023
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
17
|
Effect of machining parameters on surface quality of w-edmed Ti6Al4V alloy in ultrasonic assisted magnetic abrasive finishing technique
|
ÇELİK MAHMUT, GÜRÜN HAKAN, ÇAYDAŞ ALPARSLAN ULAŞ, KÖKLÜ UĞUR
|
Journal of the Faculty of Engineering and Architecture of Gazi University
|
2023
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
18
|
Multi-Objective Optimization of Process Parameters in Milling of 17-4 PH Stainless Steel using Taguchi-based Gray Relational Analysis
|
KARA FUAT, Bulan Nurettin, AKGÜN MAHİR, KÖKLÜ UĞUR
|
Engineered Science Publisher
|
2023
|
Uluslararası
Hakemli
Scopus
Özgün Makale
|
|
|
19
|
An Experimental Investigation on Machinability of AZ31B Magnesium Alloy under Dry and Dipped Cryogenic Approaches
|
KÖKLÜ UĞUR, KAYHANLAR Hüsnü
|
Journal of Materials Engineering and Performance
|
2022
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
20
|
Influence of extrusion parameters on drilling machinability of AZ31 magnesium alloy
|
KÖKLÜ UĞUR, KOÇAR OĞUZ, MORKAVUK SEZER, Giasin Khaled, AYER ÖNDER
|
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
|
2022
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
21
|
An experimental investigation on the influence of different surface curvatures in drilling machinability of carbon fiber reinforced plastic
|
MORKAVUK SEZER, KÖKLÜ UĞUR, ASLANTAŞ KUBİLAY
|
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
|
2022
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
22
|
Machining GLARE fibre metal laminates: a comparative study on drilling effect between conventional and ultrasonic-assisted drilling
|
Giasin Khaled, Atif Muhammad, Ma Yuan, Jiang Chulin, KÖKLÜ UĞUR, Sinke Jos
|
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
|
2022
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
23
|
An Overview of Deformation Path Shapes on Equal Channel Angular Pressing
|
BAYSAL ERHAN, KOÇAR OĞUZ, KOCAMAN ENGİN, KÖKLÜ UĞUR
|
Metals
|
2022
|
Uluslararası
Hakemli
SCI-Expanded
Derleme Makale
|
|
|
24
|
Three-Dimensional Finite Element Modeling of Drilling-Induced Damage in S2/FM94 Glass-Fiber-Reinforced Polymers (GFRPs)
|
Manzoor Shahryar, Ud Din Israr, Giasin Khaled, KÖKLÜ UĞUR, Khan Kamran A, Panier Stéphane
|
Materials
|
2022
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
25
|
Effect of Fibre Orientation on Impact Damage Resistance of S2/FM94 Glass Fibre Composites for Aerospace Applications: An Experimental Evaluation and Numerical Validation
|
Giasin Khaled, Dhakal Hom Nath, Featherston Carol, Pimenov Danil Yu, Lupton Colin, Jiang Chulin, Barouni Antigoni, KÖKLÜ UĞUR
|
Polymers
|
2022
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
26
|
Microstructural investigation and hole quality evaluation in S2/FM94 glass-fibre composites under dry and cryogenic conditions
|
Giasin Khaled, Barouni Antigoni, Dhakal Hom Nath, Featherson Carol, Redouane Zitoune, MORKAVUK SEZER, KÖKLÜ UĞUR
|
Journal of Reinforced Plastics and Composites
|
2021
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
27
|
The effect of cryogenic machining of S2 glass fibre composite on the hole form and dimensional tolerances
|
KÖKLÜ UĞUR, MORKAVUK SEZER, Featherston Carol, Haddad Malik, Sanders David, Aamir Muhammad, Pimenov Danil Yu, Giasin Khaled
|
The International Journal of Advanced Manufacturing Technology
|
2021
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
28
|
The Effect of TiN-, TiCN-, TiAlN-, and TiSiN Coated Tools on the Surface Defects and Geometric Tolerances of Holes in Multi-Spindle Drilling of Al2024 Alloy
|
Aamir Muhammad, Davis Adrian, Keeble William, KÖKLÜ UĞUR, Giasin Khaled, Vafadar Ana, Tolouei-Rad Majid
|
Metals
|
2021
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
29
|
Effect of Cutting Parameters and Tool Geometry on the Performance Analysis of One-Shot Drilling Process of AA2024-T3
|
Aamir Muhammad, Giasin Khaled, Tolouei-Rad Majid, Ud Din Israr, Hanif Muhammad Imran, KÖKLÜ UĞUR, Pimenov Danil Yu, Ikhlaq Muhammad
|
Metals
|
2021
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
30
|
Evaluation of the Surface Defects and Dimensional Tolerances in Multi-Hole Drilling of AA5083, AA6061, and AA2024
|
Aamir Muhammad, Tolouei-Rad Majid, Giasin Khaled, Vafadar Ana, KÖKLÜ UĞUR, Keeble William
|
Applied Sciences
|
2021
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
31
|
The effects of through tool cryogenic machining on the hole quality in GLARE® fibre metal laminates
|
Giasin Khaled, Dad Alisha, Brousseau Emmanuel, Pimenov Danil Yu, Mia Mozammel, MORKAVUK SEZER, KÖKLÜ UĞUR
|
Journal of Manufacturing Processes
|
2021
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
32
|
Microstructural investigation and hole quality evaluation in S2/FM94 glass-fibre composites under dry and cryogenic conditions
|
Giasin Khaled, Barouni Antigoni, Dhakal Hom Nath, Featherston Carol, Redouane Zitoune, MORKAVUK SEZER, KÖKLÜ UĞUR
|
Journal of Reinforced Plastics and Composites
|
2021
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
33
|
Evaluation of Cutting-Tool Coating on the Surface Roughness and Hole Dimensional Tolerances during Drilling of Al6061-T651 Alloy
|
Al-Tameemi Hamza A., Al-Dulaim Thamir, Awe Michael Oluwatobiloba, Sharma Shubham, Pimenov Danil Yu, KÖKLÜ UĞUR, Giasin Khaled
|
Materials
|
2021
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
34
|
Experimental study on the effects of cold chamber die casting parameters on high-speed drilling machinability of casted AZ91 alloy
|
YAZMAN ŞAKİR,KÖKLÜ UĞUR,URTEKİN LEVENT,MORKAVUK SEZER,GEMİ LOKMAN
|
Journal of Manufacturing Processes
|
2020
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
35
|
The effects of stacking sequence on drilling machinability of filament wound hybrid composite pipes: Part-2 damage analysis and surface quality
|
GEMİ LOKMAN,MORKAVUK SEZER,KÖKLÜ UĞUR,YAZMAN ŞAKİR
|
COMPOSITE STRUCTURES
|
2020
|
Uluslararası
Hakemli
SCI
Özgün Makale
|
|
|
36
|
The effects of stacking sequence on drilling machinability of filament wound hybrid composite pipes: Part-1 mechanical characterization and drilling tests
|
GEMİ LOKMAN,KÖKLÜ UĞUR,YAZMAN ŞAKİR,MORKAVUK SEZER
|
Composites Part B: Engineering
|
2020
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
37
|
Analysis of flat-end milling forces considering chip formation process in high-speed cutting of Ti6Al4V titanium alloy
|
AYDIN MEHMET,KÖKLÜ UĞUR
|
SIMULATION MODELLING PRACTICE AND THEORY
|
2020
|
Uluslararası
Hakemli
SCI
Özgün Makale
|
|
|
38
|
Effect of dipped cryogenic approach on thrust force, temperature, tool wear and chip formation in drilling of AZ31 magnesium alloy
|
KÖKLÜ UĞUR,Coban Himmet
|
Journal of Materials Research and Technology
|
2020
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
39
|
The effect of cutting tool coating on the form and dimensional errors of machined holes in GLARE (R) fibre metal laminates
|
Giasin Khaled,Hawxwell Jacob,Sinke Jos,Dhakal Hom Nath,KÖKLÜ UĞUR,Brousseau Emmanuel
|
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
|
2020
|
Uluslararası
Hakemli
SCI
Özgün Makale
|
|
|
40
|
The drilling machinability of 5083 aluminum under shallow and deep cryogenic treatment
|
KÖKLÜ UĞUR
|
EMERGING MATERIALS RESEARCH
|
2020
|
Uluslararası
Hakemli
SCI
Özgün Makale
|
|
|
41
|
Taguchi optimization of surface roughness in grinding of cryogenically treated AISI 5140 steel
|
KARA FUAT,KÖKLÜ UĞUR,KABASAKALOĞLU UFUK
|
Materials Testing
|
2020
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
42
|
Effects of the drill flute number on drilling of a casted AZ91 magnesium alloy
|
KÖKLÜ UĞUR,MORKAVUK SEZER,URTEKİN LEVENT
|
Materials Testing
|
2019
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
43
|
Effect of tool path strategies and cooling conditions in pocket machining of AZ91 magnesium alloy
|
BASMACI GÜLTEKİN,Taşkın Alper,KÖKLÜ UĞUR
|
INDIAN JOURNAL OF CHEMICAL TECHNOLOGY
|
2019
|
Uluslararası
Hakemli
SCI
Özgün Makale
|
|
|
44
|
Investigation of material removal rate and surface roughness in finishing of internalsurfaces of AISI 304 L austenitic stainless steel pipes by magnetic abrasives
|
ÇAYDAŞ ULAŞ,ÇELİK MAHMUT,KÖKLÜ UĞUR
|
Journal of the Faculty of Engineering and Architecture of Gazi University
|
2019
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
45
|
Optimization and prediction of thrust force, vibration and delamination in drilling of functionally graded composite using Taguchi, ANOVA and ANN analysis
|
KÖKLÜ UĞUR,MAYDA MURAT,MORKAVUK SEZER,AVCI AHMET,DEMİR OKAN
|
Materials Research Express
|
2019
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
46
|
Cryogenic drilling of carbon fiber-reinforced composite (CFRP)
|
KÖKLÜ UĞUR,MORKAVUK SEZER
|
SURFACE REVIEW AND LETTERS
|
2019
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
47
|
An experimental study on the effects of various drill types on drilling performance of GFRP composite pipes and damage formation
|
GEMİ LOKMAN,MORKAVUK SEZER,KÖKLÜ UĞUR,SOYLU GEMİ DİLEK
|
Composites Part B: Engineering
|
2019
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
48
|
A study of ball-end milling forces by finite element model with Lagrangianboundary of orthogonal cutting operation
|
AYDIN MEHMET,KÖKLÜ UĞUR
|
Journal of the Faculty of Engineering and Architecture of Gazi University
|
2018
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
49
|
A comparison of flood cooling, minimum quantity lubrication and high pressure coolant on machining and surface integrity of titanium Ti-5553 alloy
|
KAYNAK YUSUF,Gharibi Armin,Yılmaz Ümit,KÖKLÜ UĞUR,ASLANTAŞ KUBİLAY
|
Journal of Manufacturing Processes
|
2018
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
50
|
Thermodynamic analysis of an ejector cooling system using R123 as refrigerant under different working conditions
|
TOLU MUHAMMED EMİN,ÖZEN DİLEK NUR,KÖKLÜ UĞUR
|
International Journal of Energy Applications and Technologies
|
2018
|
Uluslararası
Hakemli
ResearchBibScience, Library Index, AcademicKeys, Rootindexing, Scientific Indexing Services,InfoBase, IndexCiteFactor, Arastirmax, Cosmos Impact Factor, Eurasian Scientific Journal Index, SJIFactor
Özgün Makale
|
|
|
51
|
Thermodynamic analysis of an ejector cooling system using R123 as refrigerant under different working conditions
|
TOLU MUHAMMED EMİN,ÖZEN DİLEK NUR,KÖKLÜ UĞUR
|
International Journal of Energy Applications and Technologies
|
2018
|
Uluslararası
Hakemli
Scientific Indexing Services
Özgün Makale
|
|
|
52
|
Cryogenic machining of carbon fiber reinforced plastic (CFRP) composites and the effects of cryogenic treatment on tensile properties: A comparative study
|
MORKAVUK SEZER,KÖKLÜ UĞUR,BAĞCI MEHMET,GEMİ LOKMAN
|
COMPOSITES PART B-ENGINEERING
|
2018
|
Uluslararası
Hakemli
SCI
Özgün Makale
|
|
|
53
|
Drilling performance of functionally graded composite: Comparison with glass and carbon/epoxy composites
|
KÖKLÜ UĞUR,DEMİR OKAN,AVCI AHMET,etyemez ayhan
|
Journal of Mechanical Science and Technology
|
2017
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
54
|
Identification and modeling of cutting forces in ball-end milling based on two different finite element models with Arbitrary Lagrangian Eulerian technique
|
AYDIN MEHMET,KÖKLÜ UĞUR
|
International Journal of Advanced Manufacturing Technology
|
2017
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
55
|
Impact of Cryogenic Condition and Drill Diameter on Drilling Performance of CFRP
|
BASMACI GÜLTEKİN,Yörük Ahmet Said,KÖKLÜ UĞUR,MORKAVUK SEZER
|
Applied Sciences
|
2017
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
56
|
Evaluation of Tool Path Strategy and Cooling Condition Effects on the Cutting Force and Surface Quality in Micromilling Operations
|
KÖKLÜ UĞUR,BASMACI GÜLTEKİN
|
Metals
|
2017
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
57
|
EFFECTS OF VARIOUS HELICALLY ANGLED GRINDINGWHEELS ON THE SURFACE ROUGHNESS AND ROUNDNESS INGRINDING CYLINDRICAL SURFACES
|
GAVAS MUAMMER,KINA MUAMMER,KÖKLÜ UĞUR
|
Materiali in Tehnologije
|
2015
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
58
|
Grinding with helically grooved wheels
|
KÖKLÜ UĞUR
|
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
|
2014
|
Uluslararası
Hakemli
SCI
Özgün Makale
|
|
|
59
|
Optimisation of machining parameters ininterrupted cylindrical grinding using the GreybasedTaguchi method
|
KÖKLÜ UĞUR
|
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING
|
2013
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
60
|
Investigation into the formability of Al 1050 tailor welded blanks with anti lock braking system ABS
|
KÖKLÜ UĞUR
|
International Journal of Advanced Manufacturing Technology
|
2013
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
61
|
Minimization of the Shape Error in the Interrupted Grinding Process by using Taguchi Method
|
Kurt M,, Köklü U,
|
Mechanica
|
2012
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
62
|
Optimization of kerf and surface roughness of Al 7 475 T7 351 alloy machined with WEDM process using the grey based Taguchi method
|
KÖKLÜ UĞUR
|
Metalurgija
|
2012
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
63
|
MINIMIZATION OF THE SURFACE ROUGHNESS AND FORM ERROR ON THE MILLING OF FREE FORM SURFACES USING A GREY RELATIONAL ANALYSIS
|
KURT MUSTAFA,HARTOMACIOĞLU SELİM,MUTLU BİLÇEN,KÖKLÜ UĞUR
|
Materials and Technology
|
2012
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
64
|
INFLUENCE OF THE PROCESS PARAMETERS AND THE MECHANICAL PROPERTIES OF ALUMINUM ALLOYS ON THE BURR HEIGHT AND THE SURFACE ROUGHNESS IN DRY DRILLING
|
KÖKLÜ UĞUR
|
Materials and Technology
|
2012
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
65
|
An Experimentaland Statistical Investigation on Shape Error in Interrupted Grinding
|
Kurt M,, Köklü U,, Atakok G, Bakır, B,
|
Diğer İndex
|
2012
|
Ulusal
Hakemli
Endekste taranmıyor
Özgün Makale
|
|
|
66
|
Influence of Molding Conditions on the Shrinkage and Roundness of Injection Molded Parts
|
KURT MUSTAFA,KAYNAK YUSUF,ömer şaban Kamber,MUTLU BİLÇEN,BAKIR BARKIN,KÖKLÜ UĞUR
|
International Journal of Advanced Manufacturing Technology
|
2010
|
Uluslararası
Hakemli
SCI-Expanded
Özgün Makale
|
|
|
67
|
Merkezi Delikli Al 1050 Sac Malzemenin Derin Çekme Özelliklerinin İncelenmesi
|
Gavas M, Köklü U, Alparslan YE,
|
Makine Teknolojileri Elektronik Dergisi
|
2010
|
Ulusal
Hakemli
Endekste taranmıyor
Özgün Makale
|
|